SK_IE

INLET ERROR CODE Cause Water supply faucets are not fully open, or low water pressure. Water inlet hoses are kinked, pinched, or crushed. Solution Make sure that the water faucets are fully open. Make sure that the hoses are not kinked, pinched or crushed behind or under the washer. Be careful when moving the washer […]

SK_DE3

TUB LID OPEN ERROR Cause Main PCB has detected that Reed Switch 1 has opened. Reed Switch 1 is a normally open switch held closed by a magnet in normal operation. Solution Be sure to check that the tub lid is fully pushed down before closing the drawer. If still has an error then check […]

SK_DE2

DRAWER LOCK ERROR Cause Main PCB has not detected a 120Vac signal from door lock when attempting to lock drawer. Solution Check drawer alignment and lock and voltage to door lock. DETAILS BELOW: 1.) Is the drawer fully closing? 2.) Is the drawer warped or misaligned? 3.) Is the door lock installed correctly? 4.) Are the […]

SK_DE1

DRAWER OPEN ERROR Cause Main PCB not detecting that Reed Switch 2 is closing when the drawer is closed. Reed Switch 2 is a normally open(NO) switch. Solution Check drawer alignment and switch. DETAILS BELOW: 1.) Is the drawer closed? Is the drawer warped or misaligned? 2.) Unplug the unit. Check Reed Switch 2 for a […]