FL_IE

INLET ERROR Cause Water supply faucets are not fully open, or low water pressure. Water inlet hoses are kinked, pinched, or crushed. Solution Make sure that the water faucets are fully open. Make sure that the hoses are not kinked, pinched or crushed behind or under the washer. Be careful when moving the washer during […]

REF_KNOB

ROTARY KNOB ERROR Cause Loose connection or defective knob / dial or no voltage Solution Check for loose connection. Check for 1~4V dc on the knob wires DETAILS BELOW:

REF_TOC

INSTA-VIEW DISPLAY MODE (NOT AN ERROR CODE) Cause “t oc” is not an error code. The InstaView Display Mode has been activated. In this special Display Mode the InstaView door in door led light will turn on for 10 seconds and then off for 2 minutes and 50 seconds and repeat over and over. This is a […]

REF_EFE

NOT AN ERROR CODE “IGNORE” Cause This is a factory worker code and may show up when attempting to recall any stored error codes.  When this code is seen it means the refrigerator does not have any error codes stored. Solution This code should be ignored and signifies no stored error is in the memory.

REF_EBU

NOT AN ERROR CODE “IGNORE” Cause This is a factory worker code and may show up when attempting to recall any stored error codes.  When this code is seen it means the refrigerator does not have any error codes stored. Solution This code should be ignored and signifies no stored error is in the memory.

REF_EFU

NOT AN ERROR CODE “IGNORE” Cause This is a factory worker code and may show up when attempting to recall any stored error codes.  When this code is seen it means the refrigerator does not have any error codes stored. Solution This code should be ignored and signifies no stored error is in the memory.

REF_ERU

NOT AN ERROR CODE “IGNORE” Cause This is a factory worker code and may show up when attempting to recall any stored error codes.  When this code is seen it means the refrigerator does not have any error codes stored. Solution This code should be ignored and signifies no stored error is in the memory.

REF_SST

WATER SUPPLY TIME (NOT AN ERROR CODE) Cause In-Door Icemaker Water Supply Time Solution When you have entered into this mode in the compensation procedure you can adjust the amount of water fill time (in seconds) for the In-Door Icemaker. You can subtract fill time if tray is overflowing due to high water pressure or […]

REF_SR

COMPENSATION MODE (NOT AN ERROR CODE) Cause Refrigerator Temperature Compensation Mode Solution When you have entered into this mode you can adjust the refrigerator temperature off set.  This is primarily used when the customer has the refrigerator set to 33F and the actual temperature achieved by the unit is slightly warmer than desired and the tech […]

REF_SF

COMPENSATION MODE (NOT AN ERROR CODE) Cause Refrigerator Temperature Compensation Mode Solution When you have entered into this mode you can adjust the refrigerator temperature off set.  This is primarily used when the customer has the refrigerator set to 33F and the actual temperature achieved by the unit is slightly warmer than desired and the tech […]