TEMPERATURE SENSOR ERROR
Cause
Temperature Sensor Error
Solution
Check connections at theremistor and main board.
Also check thermistor for proper resistance.
DETAILS BELOW:
Is connector to thermistor disconnected or corroded?
With power on, does tE error still display when shaking thermistor connection?
If so, reconnect or repair connector.
The Main board should be outputting 5 VDC to the thermistor wires measured with thermistor disconnected, if not replace main board, if yes, check thermistor resistance.
2 Responses
RNN231027070458
Not completing cycles, tE error. Thermistor out of range, read only 11 ohms, needs between 80-90 ohms at room temp. Also Wireharness to thermistor is soft at the joint. Parts replaced; 6322FR2046G-(THERMISTOR ASSEMBLY), EAD62708424-(Harness,Multi), tested fine
Ok