No water. The pressure sensor in the inlet valve has timed out due to no water pressure.

Cause

Water supply faucets are not fully open, or low water pressure.

Water inlet hoses are kinked, pinched, or crushed.

Solution

Make sure that the water faucets are fully open. Water lines are not frozen due to cold temps.

Make sure that the hoses are not kinked, pinched or crushed behind or under the washer. Be careful when moving the washer during cleaning or maintenance.

Cause

Water inlet filters are clogged.

Solution

Clean the inlet filters.

Cause

Defective valve

Solution

Troubleshoot the valve.