CTP_F2

LEFT REAR SENSOR ERROR Cause Left Rear sensor defect. Solution Check Left Rear sensor for open or shorted. DETAILS BELOW:

CTP_F1

LEFT FRONT SENSOR ERROR Cause Left Front sensor defect. Solution Check Left Front sensor for open or shorted. DETAILS BELOW:

CTP_F0

IGBT ARM SHORT Cause Fan not running. Bad inverter board. Solution Check fan for running. Check inverter board. DETAILS BELOW:

CTP_6

SIX FLASH ERROR Cause Six Flash code indicates a Low Voltage detection.  Solution Check source power, verify voltage. DETAILS BELOW:

CTP_5

FIVE FLASH ERROR Cause Five Flash code indicates there’s a fault with the Display Solution Turn the cooktop off using the Power ON / OFF. Turn the cooktop on using the ON / OFF. Check connections of CN2 on the interface PCB. If good replace PCB. DETAILS BELOW:

CTP_4

FOUR FLASH ERROR Cause Four Flash code indicates water or metal, or food spillage has come into contact for an extended period, NOTE If any one of the keys are touched for more than 10 seconds continuously, this error will be displayed. To clear error, press the POWER ON / OFF button. Solution Clean the […]

CTP_3

THREE FLASH ERROR Cause Three Flash Code indicates a fault with TH3 is open/short or 35, 56 port of Micom (U21) is open / short. Solution Turn the cooktop off using the Power ON / OFF. Turn the cooktop on using the ON / OFF. If the error persist continue to troubleshooting DETAILS BELOW:

CTP_2

TWO FLASH ERROR Cause Indicates an issue with TH2 is open/short or 35, 56 port of Micom (U21) is open/ short. Solution Turn the cooktop off using the Power ON / OFF. Turn the cooktop on using the ON / OFF. If the error persist continue to troubleshooting DETAILS BELOW:

CTP_1

ONE FLASH ERROR Cause Indicates an issue with a thermistor, or the Micom on the PCB. Solution Turn the cooktop off using the Power ON / OFF. Turn the cooktop on using the ON / OFF. If the error persist continue to troubleshooting. DETAILS BELOW: