REF_CS

CONVERTIBLE DRAWER SENSOR ERROR Cause The convertible drawer on the newer models receives air from the freezer section. The error is either a short or disconnection of Convertible Drawer Sensor. Solution Check the Sensor, from the Main PCB. Remember an ERROR CODE will only appear if 0 or 5Vdc is detected at the Main PCB DETAILS […]

REF_SS

PANTRY SENSOR ERROR Cause The Main PCB is not getting a signal from the Pantry Sensor. Solution Check the wiring at the Sensor, and Main PCB. Remember an ERROR CODE will only appear if 0 or 5Vdc is detected at the Main PCB DETAILS BELOW:

REF_DS

DEFROST SENSOR ERROR Cause The Main PCB is not getting a signal from the Defrost  Sensor. Solution Check the wiring at the sensor, and Main PCB. DETAILS BELOW: The Replacement heater comes withdefrost control (sensor) attached. You will notice the exploded view will not giveyou a part # for a defrost control by itself. 

REF_RS2

SECONDARY REFRIGERATOR / FRESH FOOD SENSOR ERROR Cause The Main PCB is not getting a signal from the second fresh food sensor. Solution Check the wiring at the sensor and Main PCB. Check thermistor for proper values. Remember an ERROR CODE will only appear if 0 or 5Vdc is detected at the Main PCB DETAILS […]

REF_CO2

CO2 ERROR Cause Display PCB and Dispenser PCB have stopped communicating with each other. Solution Check connections and proper voltages to PCB. DETAILS BELOW:

TL_DL

LID LOCK ERROR Cause Lid is NOT LOCKED. Solution Make sure that the lid is closed properly and press the Start/Pause button. You can hear the locking sound to lock the lid in the beginning of the cycle. The washer will not operate unless the lid is locked. Make sure that nothing is caught under […]

TL_DE

DOOR / LID NOT CLOSED ERROR Cause Door / Lid is NOT CLOSED fully down. Solution Make sure that the lid is closed fully and press the Start/Pause button. Check for items caught under the lid, including shipping material or clothing. Insure the latch mechanism is fully retracted. If it is a front display style […]

TL_DR

DRAIN FEATURE (NOT AN ERROR CODE) “dr” is a special drain feature If the washer is paused during a cycle for more than 4 minutes, the cycle will be canceled and any water remaining in the tub will be drained. This is not an error code. It indicates that the drain function is operating.

TL_CL

CONTROL LOCK FUNCTION (CHILD LOCK) Not an “Error Code” but will suspend operation of the unit. The control lock function is on to prevent anyone from changing cycles or operating the washer.   CHILD LOCK  (Control Lock) Use this option to prevent unwanted use of the washer or to keep cycle settings from being changed […]

TL_TCL

TUB CLEAN CYCLE INDICATOR (NOT AN ERROR CODE) Cause TCL isn’t an error code. This is an indicator that the Tub Clean cycle either is running or needs to run. On some models TC is displayed then the L is displayed. Solution TCL is an indication alert that will vary depending on frequency of washer […]