IN-DOOR ICE MAKER ICING SENSOR ERROR
Cause
The Main PCB is not getting a signal from the In-Door Icing sensor.
Solution
Check the wiring at the sensor under the left side hinge cover, and Main PCB.
Remember an ERROR CODE will only appear if – 0 or 5Vdc is detected at the Main PCB
DETAILS BELOW:
17 Responses
RNN230928027124
RNN231005065304
RNN231027071684 AI103834
RNN231117073196
RNN230928025983
Issue: IS E display on the cover display.
Multiple repaired by DMST.
Replaced door foam.
In door ice maker keep running.
Need parts order after 1st visit which are pcb main and dispenser.
RNN240105097310
RNN240105094566
RNN240111025220
RNN240102075297
RNN240117052304
RNN240125094864
RNN240126098353
RNN240129010816
RNN240308093099 AI103834
Craft icemaker
Hello guys I have a LG refrigerator popping error 15 at the UI and not letting the customer to activate water dispenser or ice dispenser. Do you have an idea?
IS and IU Error codes are both icemaker related error codes. IU is specifically the freezer icemaker motor error. Most likely there is an issue with the icemaker itself. Try running test mode on the icemaker(s) and check for wiring issues or obstructions around the tray that could be keeping the icemaker from completing a full cycle.