COMPRESSOR ERROR 1
Cause
Compressor is locked
Solution
Check the Compressor connections and wire harness.
If no defect is found replace the Duct assembly as shown.
DETAILS BELOW:
TESTING
Place in LQC Mode
Spin +Soil & Power
Advance
Advance the test mode to step 17. Watch the fan RPM, (should be approximately 4000). And the Compressor RPM should be approximately 50. If the compressor will not reach this RPM then replace the assembly.
Note: If any part of the sealed system or sensors or blower located on the Duct Assembly is defective, you must replace the whole Duct Assembly.
