EVAPORATOR "OUT" TE5 ERROR
Cause
Evaporator “OUT” Thermistor open or shorted.
Solution
Check the connectors.
Check the Thermistors resistance, 10-12Kohm at room temperature.
Check the PCB for 5Vdc.
DETAILS BELOW:
The Evaporator Outlet Thermistor will be located in a holder on the copper tubing coming out of the evaporator coil. Examples below show where you will expect to find this sensor…
The Thermistor can be checked from the main board also and should have resistance of approximately 10K ± 10% at room temperature (see chart for exact values) . Be sure to check your model’s schematic to verify test points. Example from WKHC252.
