Cause

An Add Water error reading on the dryer’s display indicates

there is a water supply error.

Solution

Before using a steam cycle, the steam feeder must be filled with water up to the MAX indicator lines.

Check the steam feeder to be sure that it is full of water and that the drawer is completely closed.

Note: do not use distilled water in the steam feeder drawer. USE TAP WATER ONLY

If the ADD Water reading appears on the dryer’s display after a cycle has started:

1.Press PAUSE to temporarily stop the running cycle.

2.Fill the steam feeder with tap water to the MAX fill line.

3.Power the unit off and back on again, select the STEAM cycle, and press the START / PAUSE button to finish the cycle.