DISH_P2

DOWNLOAD CYCLE (NOT AN ERROR) Cause The Download Cycle is selected. Solution This is not an error code. This code indicates the current Download Cycle. Use a dedicated cycle downloadable via Wi-Fi or NFC. NOTE Only the cycle code for the current Download Cycle appears on the appliance. See the smartphone app for cycle codes, names, and more information about […]

DISH_P1

DOWNLOAD CYCLE (NOT AN ERROR) Cause The Download Cycle is selected. Solution This is not an error code. This code indicates the current Download Cycle. Use a dedicated cycle downloadable via Wi-Fi or NFC. NOTE Only the cycle code for the current Download Cycle appears on the appliance. See the smartphone app for cycle codes, names, and more information about […]

WAC_F3

FAN MODE FAN SPEED SETTING (NOT AN ERROR) F1, F2, and F3 are not error codes. This indicates that the unit is set for FAN MODE and the numbers / letters displayed indicate the fan speed the unit is set for. This is normal operation. F1 = Low Speed F2 = Medium Speed F3 = […]

WAC_F2

FAN MODE FAN SPEED SETTING (NOT AN ERROR) F1, F2, and F3 are not error codes. This indicates that the unit is set for FAN MODE and the numbers / letters displayed indicate the fan speed the unit is set for. This is normal operation. F1 = Low Speed F2 = Medium Speed F3 = […]

WAC_F1

FAN MODE FAN SPEED SETTING (NOT AN ERROR) F1, F2, and F3 are not error codes. This indicates that the unit is set for FAN MODE and the numbers / letters displayed indicate the fan speed the unit is set for. This is normal operation. F1 = Low Speed F2 = Medium Speed F3 = […]

REF_HS

HUMIDITY SENSOR ERROR Cause Short or disconnection of the Humidity Sensor. Solution Check the wiring at Sensor, and at the  Main PCB. Remember an ERROR CODE will only appear if 0 or 5Vdc is detected at the Main PCB DETAILS BELOW:

STYLER_ALL CODES

STYLER ALL ERROR CODES CHART STYLER ALL ERROR CODES See the chart below to identify any STYLER ERROR CODES For wiring diagram and greater details about troubleshooting please reference the service manual DETAILS BELOW:

R&O_HS

HOT SURFACE INDICATOR (NOT AN ERROR CODE) Cause The “HS” indicator will illuminate any time the cooktop is greater than 150ºF Solution This is not an error code and is only an indication of cooktop too hot to touch. If surface is room temperature check the continuity of the hot surface switch on the burner […]

R&O_F27

COOLING FAN STALLED OR LOCKED DURING SELF CLEAN Cause Cooling fan operating can’t be detected for over 1 minute Solution Check the harness at the Cooling Fan and Main PCB DETAILS BELOW:

R&O_PF

POWER FAILURE (NOT AN ERROR CODE) Cause The “PF” message will appear when power has been interrupted to the appliance. This is not an error code. Solution To clear the “PF” message, press ON/OFF control pad to reset.Also reset the clock to correct time.